Fuel Primer Pump 20752310 21067551 21067955 Supply Pressure for Volvo D12

Fuel Pump 20752310 21067551 21067955

20752310: This is a fuel pump used in Volvo vehicles, specifically in the XC90 and S80 models from 2007-2014. It is also used in some Land Rover models.

21067551: This is a fuel pump used in General Motors (GM) vehicles, specifically in the Chevrolet Cruze and Sonic models from 2011-2016.

21067955: This is also a fuel pump used in GM vehicles, specifically in the Buick LaCrosse and Regal models from 2011-2013.

Also know car ac compressor cost on Mymromarts. We offer free shipping on many items.

 

Fuel Supply Pressure Volvo D12

The fuel supply pressure specification for a Volvo D12 engine varies depending on the year and model of the engine. However, generally speaking, the fuel supply pressure range for a Volvo D12 engine is typically between 70 and 110 psi (pounds per square inch). It's important to note that this is just a general range, and the specific fuel pressure for your engine may vary depending on the application and the specific fuel system components used.

If you're looking to diagnose a problem with your engine's fuel system, it's a good idea to refer to the manufacturer's specifications for your specific engine and model, as well as any diagnostic information provided in the service manual. You may also want to consider consulting with a qualified technician or mechanic who has experience working on Volvo D12 engines, as they can provide valuable insights and guidance on how to diagnose and repair any issues with the fuel system.

If you are considering purchasing fuel shutdown solenoid and cummins 5.9 rebuild kit and are confused about which one to choose, let us help you make the right choice.

 

Volvo D12 Fuel Primer Pump

The Volvo D12 engine typically has a manual fuel primer pump that is used to prime the fuel system after the fuel filter has been changed or after the fuel lines have been opened for service.

To use the fuel primer pump on a Volvo D12 engine, follow these steps:

• Locate the fuel primer pump, which is typically located near the fuel filter housing.
• Unscrew the protective cap on the primer pump and push down on the plunger to release any air that may be trapped in the fuel system.
• Pump the primer handle up and down until resistance is felt, indicating that fuel is flowing through the system and the fuel lines are filled with fuel.
• Once fuel has been circulated through the fuel system, tighten the protective cap on the primer pump.
• Start the engine and check for proper fuel pressure and operation.