HOW TO
-
Engine Electronic Control System
The engine electronic control system, referred to as the electronic control system, is to control the ignition, fuel injection, air-fuel ratio and exhaust emissions of the engine, so that the... -
The Composition of Automobile Electronic Control System
The automotive electronic control system generally consists of three parts in the hardware structure: sensor, electronic control unit (ECU) and actuator. When the car is running, each sensor continuously detects... -
How to Choose Diesel for Your Equipment
According to the national standard (GB252-87), the specifications of light diesel oil are divided into six grades according to the freezing point: 10, 0, -10, -20, -35 and -50, respectively... -
High Temperature Causes of Diesel Engines
For mechanical equipment powered by diesel engines, if the temperature is high for a long time, it will have a certain impact on the good running state of the whole... -
Hydraulic Pump Precautions
The oil pump and jack should use the working oil of the specified oil number, generally No. 10 or No. 20 mechanical oil, and other hydraulic oil with similar properties,... -
Excavator Hydraulic Oil Pump Structure
Excavator hydraulic oil pump structure diagram and hydraulic working principle? Hydraulic excavators are mainly composed of engine, hydraulic system, working device, traveling device and electrical control. The hydraulic system consists... -
Hydraulic Excavator Control System
1) Hydraulic oil temperature control system Most of the power loss of the hydraulic system is converted into heat, causing the oil temperature to rise. As a result, not only... -
Hydraulic Control Valve Control System
1) Pilot type control system The control forms of the reversing control valve are direct-acting type (the main spool of the reversing valve is directly controlled by the handle, which... -
Hydraulic Transmission
At present, electromechanical-hydraulic integration is the main development steering wheel of hydraulic excavators. Its purpose is to realize full automation of hydraulic excavators, that is, people's research on hydraulic excavators... -
How To Solve Problems Of Loader Working Devices
The loader arm lifts normally, but the tipping bucket is slow The main reason for the failure is the tipper cylinder. The setting pressure of the two overload valves of... -
Troubleshooting Of Loader Working Devices
The speed of the loader arm is slow when lifting and closing the bucket When this happens, first check whether the oil pump level in the fuel tank is too... -
Loader Working Device
The working device of the loader consists of a bucket, a boom, a connecting rod, a rocker arm, a bucket cylinder, and a boom cylinder. The digging and loading and...
