AVR R731 Automatic Voltage Regulator for Generator Genset
YOU MAY ALSO NEED
Leroy Somer AVR R731 Automatic Voltage Regulator for Generator Genset
See Details:
Input voltage :
High voltage tap (400V):340V-5% to 480V=5%
Low voltage tap (110V):90V-5% to 140V+5%
Medium voltage tap (230V):200V-5% to 240V+5%
Maximum current for 10s:10A
Internal voltage rheostat :
The voltage can be adjusted using the internal rheostat P1. This rheostat is designed to provide +/-5% adjustment from any voltage within the above voltage ranges.
Remote voltage rheostat :
If required, remove the ST10 jumper in order to connect a remote voltage rheostat.
A 470 Ohms - 3W rheostat can be used for a +/-5% voltage adjustment range or a 1k Ohms - 3W rheostat for a +/-10% voltage range.
An ST1 jumper was included on older R731 modules to increase the voltage adjustment range but was discontinued.
voltage droop
Current sensing : C.T. for // operation
Location : standard line 1 (U), option line 2 (V).
- Maximum continuous current : 1.3A
- Nominal current : 1A
- Maximum current for 10s : 10A
Voltage droop rheostat :
The P2 rheostat on the R731 can be used to adjust the voltage droop. It is designed to provide a minimum voltage droop of 8% at 0 power factor and 1A from the paralleling CT.
AVR R731 Automatic Voltage Regulator for Generator Genset for sale on our website.
In addition to this AVR R731 Automatic Voltage Regulator, you can also buy other models or other parts of Excavators, Forklift, Aerial Work Platforms AWP and etc. on our website.
