HOW TO
-
Inspection of Valves Related to Hydraulic Cylinders
Inspection of Positioning Valve Seal of Hydraulic Cylinder Check the farm equipment on the fashion, remove the positioning clamps, start the engine, when the hydraulic oil temperature reaches 40～60℃, lift... -
How to replace an engine coolant temperature sensor?
The engine coolant temperature (ECT) sensor measures coolant temperature in the cooling system, allowing the PCM to control spark timing and fuel mixture. The ECT sensor is a high authority... -
Introduction to Disassembly-Free Inspection of Hydraulic Components
Overview It is difficult to troubleshoot the hydraulic system of agricultural machinery, mainly due to the deterioration of the working performance of hydraulic components. This paper introduces how to check... -
Analysis of the Main Points of Maintenance of Hydraulic Components
Hydraulic device maintenance to the system as the goal, the hydraulic components as a basic component of the individual, a hydraulic system mainly consists of: power components, executive components, control... -
Basic Information of A PTO Switch
A PTO switch (power take off switch) is usually a separate drive shaft mounted on a tractor or truck that directly controls equipment mounted on the motor. The PTO switch is... -
How Often to Change Different Types of Filters?
Different types of filters Fuel filters A fuel filter is a device that removes unwanted substances when the fuel passes through the fuel system. It is mainly used to filter... -
Introduction of The Engine Coolant Temperature Sensor
What is the engine coolant temperature sensor? The engine coolant temperature sensor (ECTS), also known as the coolant temperature sensor (CTS) or the ECT sensor, measures the temperature of the coolant/antifreeze mixture in... -
Classification of The Alternator
Definition of the alternator An alternator is a generator that converts mechanical energy into electrical energy in the form of alternating current. Most alternators use a rotating field with a... -
How Does Steering System Works?
The power steering system configured on the car can be roughly divided into three categories: mechanical hydraulic power steering system, electrohydraulic power steering system and electric power steering system. The... -
What Is The difference Between A Valve And a Solenoid?
What is a valve? If you must control fluid, air, or gas in your system, valves can help. Valves are critical components in everything from simple household tools like sprinkler... -
Can I Replace An Ignition Switch Myself?
The ignition switch of the car is broken and can be replaced. Damage to the ignition switch will cause the vehicle to fail to ignite, fail to turn off the... -
Power and Efficiency of Hydraulic Pumps
Power and Efficiency The power loss of hydraulic pump. The power loss of hydraulic pump has two parts: volume loss and mechanical loss: Volume loss. Volume loss refers to the...
