Oil Cooler 239-7851 2892304 for Caterpillar CAT Engine C15 3406E Cummins X15 ISX15 ISX Engine

Oil Cooler 239-7851 for Caterpillar CAT Engine C15 3406E

The Oil Cooler 239-7851 for Caterpillar CAT Engine C15 3406E is a device that accelerates the heat dissipation of lubricating oil to keep its temperature low. In high-performance, high-powered reinforced engines, due to the large heat load, and must be installed oil cooler. The Oil Cooler 239-7851 for Caterpillar CAT Engine C15 3406E is arranged in the lubricating oil circuit, and its working principle is the same as the radiator.

The Oil Cooler 239-7851 for Caterpillar CAT Engine C15 3406E core materials are required to have strong corrosion resistance and heat dissipation, there are generally two kinds, one is copper, is stainless steel, of course, copper is preferred to have strong heat dissipation and corrosion resistance, stainless steel is the second, stainless steel heat dissipation is not as good as copper materials but corrosion resistance is stronger than copper materials.

 MyMRO also sells the Oil Cooler 239-7851 for Caterpillar CAT Engine C15 3406E. You are also welcome to purchase after making sense of the fuel injector replacement cost.

Oil Cooler 2892304 for Cummins X15 ISX15 ISX Engine

The Oil Cooler 2892304 for Cummins X15 ISX15 ISX Engine is placed in the cooling water circuit and uses the temperature of the cooling water to control the temperature of the lubricating oil. When the temperature of lubricating oil is high, it relies on cooling water to cool down, and when the engine starts, it absorbs heat from cooling water to make lubricating oil raise temperature rapidly. The Oil Cooler 2892304 for Cummins X15 ISX15 ISX Engine is composed of an aluminum alloy cast shell, front cover, back cover, and copper core tube. In order to strengthen the cooling, the outside of the tube set off the heat sinks. The cooling water flows outside the tube, and the lubricating oil flows inside the tube and the two exchange heat. There is also a structure that makes the oil flow outside the tube and the water flow inside the tube again.

MyMRO provides a great deal of the Oil Cooler 2892304 for Cummins X15 ISX15 ISX Engine and cummins 5.9 rebuild kit , we are always willing to serve you.

Consequences Of Oil Cooler Leakage

1. High oil dispenser temperature and high oil consumption

The oil cooler is damaged, and the frequent symptom is the oil temperature is too high. Because the role of the oil radiator is to force the cooling of the oil, if the oil cooler is bad, it is equivalent to the loss of forced cooling of this function. It will make the oil temperature rise, accelerate the consumption of oil, and even oxidation and deterioration.

2. Oil into the tank, antifreeze failure

After the oil cooler leaks, the oil will flow into the antifreeze, oil, and antifreeze mixed together, which will make the antifreeze fail. If the motor vehicle continues to work, the engines will be greatly affected.

3. Reduce the original performance of the coolant

If the oil cooler duct is broken, it will cause the water tank to enter the oil, which will reduce the original performance of the coolant and have a great impact on the cooling effect of the car.

If you are willing to purchase an oil cooler, you could view MyMRO where you can also know about the cost of an oil filter.