Injector Pump for Isuzu Engine Bd154 4Jb1 Tf Rodeo and Mitsubishi 4D56

Injector Pump for Isuzu Engine 4Jb1

   A  fuel injection pump for Isuzu Engine 4Jb1is a device in a car that pumps fuel into the cylinders of a gasoline or diesel engine. The injection pump is indirectly driven from the crankshaft by means of a gear, chain or timing belt, which also operates on the camshaft. It is usually attached to the camshaft so that they are connected to each other.

The fuel injection pump for Isuzu Engine 4Jb1 delivers high pressure fuel to the distributor tube to ensure a constant supply of fuel to the injectors.This fuel injection pump consists of an electric motor, a pressure limiter, and a check valve. The electric motor actually works in the fuel inside the fuel pump housing, so don't worry because there is nothing inside the housing to ignite, the fuel lubricates and cools the fuel motor, the outlet is equipped with a check valve, and the pressure limiter is located on the pressure side of the fuel pump housing with a passage to the inlet.

Zexel is a major manufacturer of fuel injection pump and zexel injection pump is for sale. MyMRO also sales zexel injector pump and for sale. Welcome to cost of fuel injector.to purchase.

 Injector Pump for Isuzu Engine Tf Rodeo Bd154

If you are looking for a good performing injector pump, Tf Rodeou and Bd154  injector pump produced by Isuzu Engine can be considered as good choices.

The Injector Pump for Isuzu Engine tf rodeo injector pump draws fuel from the fuel tank to the fuel lines and the high-pressure pump pressurizes the fuel to a maximum of 1,800 atmospheres, which is deposited in the fuel rail. A fuel pressure regulator regulates the pressure in the fuel rail. The high pressure fuel in the rail is injected into the injectors through the manifold and eventually into the cylinder combustion chamber, where it is mixed with the intake air.

Injector pump for Isuzu engine Bd154 mainly consists of the following accessories:Front Crankshaft Seal, Rear Crankshaft Seal, Wrist Pin Bushings (3043611R1), Piston & Pin and etc.

 MyMRO offers good quality Tf Rodeo injector Pump at low prices. View more at fuel injectors cost.

 Injector Pump for Mitsubishi engine 4D56

The injector pump for Mitsubishi engine 4D56 consists of an electric motor, a pressure limiter, and a check valve. The electric motor actually works in the fuel inside the pump housing because there is nothing inside the housing to ignite, and the fuel lubricates and cools the fuel motor. An inspection valve is installed at the outlet, and the pressure limiter is located on the pressure side of the fuel pump housing with a passage to the inlet.

The injector pump for Mitsubishi engine 4D56 features a common rail, 16-valve, twin-cam design and up to 178bhp of power.The cylinder head of the 4d56 is made of aluminum, while the block is made of cast iron. This is why it is possible to provide good thermal stability.

MyMRO provides you with high-quality services for these products, learn more in cost of fuel injectors.