Introduction of Binnacle Control Box 704-48205-R0-00 for Yamaha Outboard 704 Boat Motor Engine

How about Binnacle Control Box 704-48205-R0-00 for Yamaha ?

Binnacle Control Box 704-48205-R0-00 for Yamaha contains following replace part number:704-48205-R0-00, 70448205R000, 704-48205-P1-00, 704-48205-P0-00, 70448205P100, 70448205P000.

Three significant applications of Binnacle Control Box 704-48205-R0-00 for Yamaha  are fitting for Yamaha Outboard 704 Boat Motor Engine,2006 and Later 2-stroke Rigging Control Binnacle Premium Single and 2006 and Later 4-stroke Rigging Control Binnacle Premium Single.

MyMRO offers good quality Binnacle Control Box 704-48205-R0-00 for Yamaha and cummins 5.9 rebuild kit at low prices.
We also sell other high-quality products including fuel injector replacement. View more at MyMRO about fuel injector replacement cost.

User’s Guide for Binnacle Control Box 704-48205-R0-00 for Yamaha

The operation of Binnacle Control Box 704-48205-R0-00 for Yamaha may vary from one outboard model to another. Please refer to the outboard's operating instructions for specific instructions related to the outboard at the time of purchase.

1、If the operator is thrown off the helm, the sling will pull the clip of the key switch, stopping the outboard. In an emergency, the passenger can place the control handle in the "neutral" position to restart the outboard without a tether.

2、Fast idle

Binnacle Control Box 704-48205-R0-00 for Yamaha do not need to use the fast idle function. The quick idle button can be used to push the throttle without changing gears. With the control lever in neutral, press the fast idle button (cap), open the throttle for a start and warm up.

To prevent the engine from stalling, do not drive the cold engine too fast. At standstill, do not exceed 2500 rpm. If the throttle is advanced at start-up, lower the idle setting as soon as the outboard starts.

3、Control Handle

The outboard must be off. If Binnacle Control Box 704-48205-R0-00 for Yamaha is connected to the outboard, turn the propeller shaft while transferring the remote control. With the control handle in "neutral" and the fast idle function not activated, you need to move the control handle to the forward or reverse gear position. Continue moving the control handle in the same direction to open the (forward) throttle.

MyMRO provides you with high-quality services and for these products .Besides, fuel shutdown solenoid are also sold in MyMRO.