Oil Pressure Sensor 3967251 4921517 for Cummins 6BT 5.9 ISX Engine

Oil Pressure Sensor 3967251 for Cummins 6BT 5.9 Engine

The Oil Pressure Sensor 3967251 for Cummins 6BT 5.9 Engine is a device that converts pressure signals into electrical signals through the piezoresistive effect. The oil pressure sensor is one of the most commonly used sensors in the industry. As an important part of hydraulic equipment, Oil Pressure Sensor 3967251 for Cummins 6BT 5.9 Engine is used for pressure measurement and control, which can be used to accurately measure the pressure to be measured and transmit the test results to the subsequent display or control in a timely manner.

The Oil Pressure Sensor 3967251 for Cummins 6BT 5.9 Engine is mainly composed of three major parts: the pressure collector, the transmission circuit, and the electrical output interface. The basic structure of the pressure collector is to sense the pressure change through the strip resistor, while the change in resistance is amplified into differential pressure through the Wheatstone bridge structure, and then transmitted to the converter circuit for filtering, amplification, and other processing. In the process of oil pressure detection, its temperature change is inevitable. Usually, a separate temperature-sensitive resistor is made outside the four resistance strips of the Wheatstone bridge to synchronously detect the temperature change in the area where the sensitive resistor is located and provide the temperature value for the subsequent temperature drift correction. At the same time, in order to prevent the impact of oil pressure overshoot, some products make an inverted funnel-type inlet at the front of the pressure extractor, which can obviously avoid and reduce the impact of oil pressure overshoot.

In the MyMRO store, a great deal of Oil Pressure Sensor 3967251 for Cummins 6BT 5.9 Engine and cylinder blocks for sale.

Oil Pressure Sensor 4921517 for Cummins ISX Engine

The future development of technology will put forward higher requirements for the Oil Pressure Sensor 4921517 for Cummins ISX Engine, their product characteristics will be miniaturized, intelligent, and professional direction. The direction of miniaturization is beneficial to the OEM of pressure sensors, reducing the size of the sensor will make it more selective in the design of the whole machine; intelligent development direction to avoid the reprocessing of the sensor output results of subsequent equipment; applied to the development of different areas of specialization of the Oil Pressure Sensor 4921517 for Cummins ISX Engine, highlighting the application of different industries, the circuit design of the Oil Pressure Sensor 4921517 for Cummins ISX Engine, the overall design of a better Requirements (such as the application of the Oil Pressure Sensor 4921517 for Cummins ISX Engine inside the engine combustion chamber requires a sensor operating temperature range of up to 700 ℃)

MyMRO provides substantial Oil Pressure Sensor 4921517 for Cummins ISX Engine and cummins 5.9 rebuild kit, we always welcome you to buy.

Symptoms of a Damaged Oil Pressure Sensor

1. Carbon buildup will cause insufficient gasoline combustion so the engine will have the problem of shaking.

2. Causes cold start difficulty, that is, difficult to fire, and not easy to start the car.

3. Cause high engine temperature and thus seriously affect the safety of the car. Then if the emissions exceed the standard, not only can not pass the annual audit test but also directly aggravate the danger of pollution of the environment.

MyMRO sells High-quality oil pressure sensors and fuel shutdown solenoid. Interested in buying these products can enter our website, and we will provide you with satisfactory service.