Automatic Voltage Regulator AVR EA08A for Generator Genset
TAMBIÉN PUEDE NECESITAR
AutomaticVoltage Regulator AVR EA08A for Generator Genset
Part Number:
EA08A
Details:
Product Description
The regulation accuracy is < ±0.5%
220/380/440 VAC brushless generator is suitable for use
Three-phase voltage detection
15 ADC large output current
Selection of 50/60 Hz by jumper copper
With low-frequency protection and slow voltage build function
Voltage, stability, and low-frequency protection settings can be adjusted
With HRC fuse protection
Technical Parameter
Voltage:
220/380/440 VAC three-phase three wireFrequency: 50/60 Hz, selection by jumper copper
Voltage:
100~300 VAC single phase two-wire
Voltage:
Voltage: 240 VAC maximum 90 VDC
Current: continuous 15A, discontinuous for 10 seconds 20A
Resistance: Minimum 4 Ohm @ 35 VDC
< 0.5% (engine speed variation within 4%)
The residual voltage of the AVR input terminal is more than 5 VAC
When using a 1 K Ohm 1 watt potentiometer, it is + 15%
Maximum 8 watt
2 seconds
The voltage drift is 0.03% at each degree of C change
The inflection point of the 60 Hz system is 55 Hz
The inflection point of a 50 Hz system is 45 Hz
Operating temperature: -40~65 degrees C
Storage temperature: -40~85 degrees C
Relative humidity: less than 95%
Vibration: 3G @ 100~2 kHz
VOLT: regulating voltage
STAB: regulation stability
U/F: adjust the low-frequency protection inflection point value
| Part Number | EA08A |
Automatic Voltage Regulator AVR EA08A for Generator Genset for sale on our website.
In addition to Automatic Voltage Regulator AVR EA08A, you can also buy other models or other parts of Excavators, Forklift, Aerial Work Platforms AWP and etc. on our website.
