Drive Belt Tensioner Replacement for Bobcat Skid Steer Bobcat T590 T190 773 T650

Drive Belt tensioner for Bobcat Skid Steer 773

A drive belt tensioner is a critical component of any Bobcat skid steer, including the 773 model. This device is responsible for maintaining the proper tension on the drive belt, ensuring that it remains in place and operates smoothly. Without a functioning drive belt tensioner, your Bobcat skid steer will likely experience a host of issues that can lead to downtime and decreased productivity.

Understanding the Role of a Drive Belt Tensioner

The drive belt tensioner is responsible for ensuring that the drive belt remains properly tensioned at all times. When a skid steer is in use, the drive belt is responsible for transferring power from the engine to the machine's various systems, including the hydraulics and the wheels. The bobcat drive belt tensioner keeps the belt in place, preventing it from slipping or coming off altogether.

A drive belt tensioner typically consists of a pulley mounted on an arm that is held in place by a spring or hydraulic cylinder. When the drive belt becomes loose, the tensioner will move the arm to increase tension on the belt. This keeps the belt in place and ensures that it remains properly tensioned, even as the skid steer is in use.

MyMRO is a specialized and leading brand for supplying fuel shutdown solenoid.

Symptoms of a Failing Drive Belt Tensioner

When a drive belt tensioner begins to fail, it can manifest in a number of different ways. Some of the most common symptoms of a failing drive belt tensioner in a Bobcat skid steer 773 include:

Squeaking or Squealing: If the drive belt tensioner is failing, you may hear a squeaking or squealing sound coming from the engine compartment. This is often a sign that the tensioner is not keeping the belt properly tensioned, causing it to slip and produce noise.

Belt Slippage: If the drive belt tensioner is not maintaining proper tension on the belt, the belt may begin to slip. This can cause a loss of power or even complete failure of the skid steer's various systems.

Belt Misalignment: A failing drive belt tensioner may also cause the drive belt to become misaligned. This can cause the belt to wear unevenly, leading to premature failure and increased maintenance costs.

View to know more about the cost of an oil filter.

Drive Belt replacement for Bobcat T590 T190 T650

Replacing the drive belt on a Bobcat T590, T190, or T650 skid steer is a relatively straightforward process. Here are the general steps you can follow:

Park the Bobcat t190 drive belt on a level surface and turn off the engine.

Lower the bucket or attachment to the ground and engage the parking brake.

Open the rear door to access the engine compartment.

Locate the drive belt, which is a large rubber belt that runs from the engine to the hydraulic pump.

Loosen the tension on the drive belt by using a wrench to turn the tensioner pulley bolt counterclockwise.

Slide the drive belt off the pulleys.

Install the new drive belt onto the pulleys, making sure it is properly aligned and seated.

Use a wrench to turn the tensioner pulley bolt clockwise to tighten the tension on the new drive belt.

Check the tension on the drive belt with a tension gauge to ensure it is within the manufacturer's specifications.

Close the rear door and start the engine to test the new drive belt.

We welcome your to inquiry about cummins 5.9 rebuild kit.