New Manual Transmission Shifter Cable 21996492 for 2004 2005 Saturn Vue

The structure of  Manual Transmission Shifter Cable 21996492 for 2004 Saturn Vue

The Manual Transmission Shifter Cable 21996492 for 2004 Saturn Vue includes a cable locking core and a transmission joint attached to the end of said cable locking core, a housing cavity inside the transmission joint, said housing cavity is filled with vibration-damping rubber and said vibration-damping rubber is provided with a vibration-damping cavity. The Manual Transmission Shifter Cable 21996492 for 2004 Saturn Vue can effectively improve vibration isolation without increasing the size and weight.

Manual Transmission Shifter Cable 21996492 for 2004 Saturn Vue has been a best seller and sold in MyMRO. Cummins 5.9 rebuild kit is also a welcomed one in our store.

How to Adjust Manual Transmission Shifter Cable 21996492 for 2005 Saturn Vue ?

1. Ensure that the flexible shaft fixed end of the Manual Transmission Shifter Cable 21996492 for 2005 Saturn Vue is in an adjustable state.

2. Align the pointer of the lock washer with the N position scale line on the gear selector switch.

3. Place the gear lever of the Manual Transmission Shifter Cable 21996492 for 2005 Saturn Vue in the N position.

4. Turn the shift arm counterclockwise to the end and then turn it clockwise by two notches.

5. Snap the flex shaft to the shift arm assembly and lock the flex shaft.

6. Turn it on, push the shift lever, and see if the position of the shift lever is the same as the gear position displayed by the meter, if not, readjust it.

7. When the shift lever is placed, depress the brake pedal and operate the shift lever should be able to release from the P gear smoothly.

MyMRO is a quality distributor of automotive parts. We provide Starter Motor 2873A031 for Perkins Engine, fuel shutdown solenoid and etc.

Saturn Vue Shifter Cable Replacement

The process of Saturn Vue shifter cable replacement can be done by yourself, and the following are the Saturn Vue shifter cable replacement steps.

1. Need to remove the air filter box operation, if there is no tie, or first cut the tie, you can first remove the plastic box cover, and then the need to repair the cable, that is, the red circle here, from the card position outward, so that you can take out the cable, and then deal with.

2. Be sure to use boiling water on the cylindrical rubber sleeve hot minute, and then stuck it in the lasso, installation can be greased, and with tools to the protruding side of the top, you can smoothly be stuck in the cable.

3. To repair the head of the lasso installed back, first the plastic shell there card position card stable, and then the head of the cable is pressed on the metal shaft.

Saturn Vue shifter cable enjoys great popularity on MyMRO. It is also possible to inquire about the fuel injector replacement cost.