Water Pump EA4712001101 for Detroit DD15 Mercedes-Benz OM 470 LA OM 471 LA Engine Freightliner Cascadia

What does a Water Pump for Freightliner Cascadia Work for?

A Water Pump for Freightliner Cascadia is a machine that conveys liquid or makes liquid pressurized. Water Pump for Freightliner Cascadia transmits the mechanical energy of the prime mover or other external energy to the liquid to increase the energy of the liquid, mainly used to convey liquids including water, oil, acid and alkali liquids, emulsions, suspended emulsions, and liquid metals. Can also convey liquids, gas mixtures, and liquids containing suspended solids. The technical parameters of water pump performance are flow rate, suction range, head, shaft power, water power, efficiency, etc.

The water Pump for Freightliner Cascadia is priced at a discount on MyMRO. You can even view more about car ac compressor cost.

Installation methods of EA4712001101 Water Pump for Detroit DD15

1. Under the condition of the geographical environment, the EA4712001101Water Pump for Detroit DD15 should be as close to the water source as possible to reduce the length of the water suction pipe. The foundation at the installation of the EA4712001101 Water Pump for Detroit DD15 should be firm, and a special foundation should be repaired for the fixed pumping station.

2. The inlet pipe should be sealed and reliable, and must have special support, not hanging on the pump. The inlet pipe with the bottom valve should be installed vertically with the horizontal surface as far as possible, and the angle between its axis and the horizontal surface should not be less than 45°. When the water source is a channel, the bottom valve should be more than 0.50m above the water bottom, and the net should be added to prevent debris from entering the pump.

3. The base of the machine and pump should be level, and the connection with the foundation should be firm. When the machine and pump belt drive, the belt tight side in the next, so that the transmission efficiency is high, and the pump impeller should be turned in the same direction as the arrow; when using the coupling drive, the machine and pump must be a coaxial line.

4. The installation position of the EA4712001101Water Pump for Detroit DD15should meet the requirements of the allowable vacuum height, the foundation must be horizontal and stable to ensure that the direction of rotation of the power machinery is consistent with the direction of rotation of the pump.

5. The suction pipe of the EA4712001101Water Pump for Detroit DD15must be well sealed, the elbow and gate valve should be reduced as much as possible, the air should be exhausted when filling the water, and the air should not accumulate in the pipe when running, and the suction pipe should be slightly inclined and connected with the water inlet of EA4712001101 Water Pump for Detroit DD15, and the water inlet should be submerged to a certain depth.

In the MyMRO store, a great deal of EA4712001101 Water Pump for Detroit DD15 and cylinder blocks for sale.

Reasons for the decline of water pump efficiency

1. Due to the scouring of the water, the inner wall of the pump runner and the impeller over the water surface become rough and uneven, and the friction coefficient of the runner in the pump increases, coupled with the large flow rate of water in the pump, the head loss increases. Hydraulic efficiency is reduced.

2. Serious scale or corrosion in the pump casing due to the drug or water quality before the pump. The serious scale accumulation in the pump casing can make the pump casing wall thickness increase by about 2ram, and the formation of scale tumor on the inner wall of the pump, so that the volume of the pump body is reduced, the pumping volume is reduced, and the flow path is rough, and the head loss is increased. The efficiency of customer volume and hydraulic efficiency are reduced.

MyMRO sells High-quality fuel shutdown solenoid and water pumps. Interested in buying these products can enter our website, and we will provide you with satisfactory service.