Oil Pressure Sensor 4921744 for Cummins ISX ISX15 Engine

What Is Oil Pressure Sensor 4921744 for Cummins ISX ISX15 Engine?

The Oil Pressure Sensor 4921744 for Cummins ISX ISX15 Engine is mainly composed of three major parts: the pressure pickup, the transmission circuit, and the electrical output interface. The basic structure of the pressure collector is to sense the pressure change through the strip resistance.

In the process of oil pressure detection, its temperature change is inevitable. Usually, a separate temperature-sensitive resistor is made outside the four resistance bars of the Wheatstone bridge to synchronously detect the temperature change in the area where the sensitive resistor is located and provide the temperature value for the subsequent temperature drift correction. At the same time, in order to prevent the impact of oil pressure overshoot, some products make an inverted funnel-type inlet at the front of the pressure extractor, which can obviously avoid and reduce the impact of oil pressure overshoot.

MyMROmarts provides substantial Oil Pressure Sensor 4921744 for Cummins ISX ISX15 Engine and cummins 5.9 rebuild kit, we always welcome you to buy.

The Function of Oil Pressure Sensor 4921744 for Cummins ISX ISX15 Engine

The Oil Pressure Sensor 4921744 for Cummins ISX ISX15 Engine is used to control the fuel pressure in the fuel circuit, maintain a constant supply of fuel pressure to the injector, and send excess fuel back to the fuel tank. The Oil Pressure Sensor 4921744 for Cummins ISX ISX15 Engine consists of a printed circuit board, sensor element, spacer block, housing, etc. There is a pressure cavity with a diaphragm with a relief valve in the cavity, a true cavity on the inside of the diaphragm, and a spring in the cavity.

MyMROmarts sells High-quality Oil Pressure Sensor 4921744 for Cummins ISX ISX15 Engine and fuel shutdown solenoid. Interested in buying these products can enter our website, we will provide you with satisfactory service.

The Working Principle of Oil Pressure Sensor 4921744 for Cummins ISX ISX15 Engine

The working principle of Oil Pressure Sensor 4921744 for Cummins ISX ISX15 Engine is that the pressure acts directly on the diaphragm of the sensor, causing the diaphragm to produce a micro-displacement proportional to the pressure of the medium, causing a change in the resistance of the sensor, and the electronic circuit to detect this change and convert the output to a standard signal corresponding to this pressure.

In MyMROmarts store, a great deal of Oil Pressure Sensor 4921744 for Cummins ISX ISX15 Engine and cylinder blocks for sale.

If you're in need of a reliable best oil filter for synthetic oil, look no further than our selection of high-quality filters. Our FR691V oil filters are designed to meet the needs of your engine, ensuring optimal performance and longevity.

If you're looking for the best oil filter brand, look no further than our top-rated products. Our filters are designed to provide maximum filtration efficiency, ensuring that your engine stays protected and running smoothly. Trust us to deliver the quality and reliability you deserve from the best oil filter brand on the market.

If you own a 6.7 Cummins engine, it's important to know the tools needed to change the fuel filter. To do this job, you'll need a socket wrench to remove the bolts holding the filter housing in place, a torque wrench to tighten them back up, a drain pan to catch any fuel that spills, a new fuel filter to replace the old one, and a filter wrench to remove and install it properly.

But what is the cost of fuel injector replacement? The answer to this question depends on several factors, including the make and model of your vehicle, the number of injectors that need replacing, and the labor costs of the mechanic performing the replacement.