Oil Pump 200-4497 4026691 for Caterpillar CAT Engine 3126 Cummins Engine ISX

Oil Pump 200-4497 for Caterpillar CAT Engine 3126 

The Oil Pump 200-4497 for Caterpillar CAT Engine 3126 is a light and compact pump with three major categories: inline, distribution, and monoblock. The Oil Pump 200-4497 for Caterpillar CAT Engine 3126 has to have a power source to run, and its lower camshaft is driven by the engine crankshaft gear.

The Oil Pump 200-4497 for Caterpillar CAT Engine 3126 consists of a motor, pump sleeve, end shell, rotor, and rotor elastomer; the pump sleeve and end lining are made of high-quality steel, and the rotor is wear-resistant non-metallic materials, making all friction contact surfaces of the pump are highly wear-resistant friction surface, so the Oil Pump 200-4497 for Caterpillar CAT Engine 3126 is very resistant to wear and tear, solid and durable, long service life; pump axial and radial are designed and installed with automatic gap compensation mechanism, with automatic gap compensation function, after the wear of the parts, durable, lasting a very high vacuum level remains unchanged; unique design structure, even if the opposite direction of rotation, will not damage the parts.

The Oil Pump 200-4497 for Caterpillar CAT Engine 3126 and cummins 5.9 rebuild kit is selling like hot cakes and we have lots of regulars now in MyMRO. Besides, If you want to buy something other products including fuel shutdown solenoid than the above, welcome you to MyMRO.  

Oil Pump 4026691 for Cummins Engine ISX

The Oil Pump 4026691 for Cummins Engine ISX is suitable for conveying various oils, such as heavy oil, diesel oil, and lubricating oil, with copper gears that can be transported within the point of the low liquid, such as gasoline, benzene, etc. The unit also produces stainless steel gear pump that can be transported drinks and corrosive liquids. The Oil Pump 4026691 for Cummins Engine ISX can also be applied to contain hard particles or fibers, for a variety of viscosity. The temperature can be as high as 300℃. If you need to convey high-temperature liquid, please use a high-temperature resistant gear pump, which can convey liquid below 300℃.

The Oil Pump 4026691 for Cummins Engine ISX is simple and compact, easy to use and maintain, with good self-priming, and does not need to be filled with liquid before each pump start. The lubrication of oil pumps is automatically achieved by the transported liquid, so there is no need to add another lubricating fluid during daily work. The use of flexible couplings to transmit power can compensate for the small deviation caused by the installation of the oil pump. In the pump work, the inevitable hydraulic shock can play a good cushioning effect.

Maintenance of the Oil Pump

The maintenance of the oil pump should pay attention to the following aspects.

1. Water will corrode the oil pump, so it is forbidden to use the oil pump to pump the vacuum for the substances containing water.

2. Please remove most of the solvent in the oven before using the oil pump to pump the vacuum for the substance containing a large amount of solvent.

3. Use the vacuum pump in the correct order to prevent the reverse suction phenomenon.

4. After using the vacuum oven, be sure to do a good job of cleaning, and wiping clean the glass window of the vacuum oven.

5. Wipe clean the surface anti-rust oil.

The oil pump has been a best seller and sold in MyMRO. And you can know about fuel injector replacement cost here.