Troubleshooting Case 85XT Skid Steer Loader

The Case 85XT skid steer loader is an efficient construction machine. During long-term use, the Case 85XT skid steer loader may experience various problems, hindering the user's normal construction. Understanding some common faults of the 85XT skid steer loader in advance can help users pay attention to these problems. In this article, MyMROmarts will introduce some common faults of the 85XT skid steer loader and the corresponding troubleshooting methods.

 

1. Case 85XT Engine Is Difficult To Start Or Cannot Start

1.1 Air Enters The Fuel System

When the user is driving the Case 85XT, he finds that the engine is difficult to start or cannot start. MyMROmarts recommends that users should first check whether there is air in the fuel system. If so, the solution is to bleed the fuel system until there is no air in the fuel line affecting normal fuel supply.

 

1.2 The Fuel Filter Element Is Clogged

MyMROmarts recommends users check the fuel filter regularly. When it is found that the engine is difficult to start, the user needs to remove impurities on the filter element to ensure smooth fuel flow. Users need to check whether the filter element is clogged, causing insufficient fuel supply and affecting engine starting.

 

1.3 Fuel Injector Failure Or Blockage

Engine starting problems can also be caused by a faulty or clogged fuel injector. MyMROmarts reminds users to clean or replace fuel injectors regularly to prevent engine starting problems.

 

1.4 Water In Fuel

If the user finds moisture in the fuel, replace the fuel promptly and repair the fuel system.

 

1.5 Valve Clearance Is Too Large

MyMROmarts recommends users regularly check and adjust the valve clearance of Case 85XT. Users need to ensure that the valve clearance of Case 85XT is within the specified range, to optimize combustion efficiency and solve engine starting problems.

 

1.6 The Fuel Injection Pump Is Damaged

If the fuel injection pump is found to be faulty, MyMROmarts recommends that users promptly repair or replace the fuel injection pump of Case 85XT to ensure the normal supply of fuel.

 

2. The Drive System Of Case 85XT Continues To Overheat

2.1 Low Hydraulic Oil Level

MyMROmarts recommends users add hydraulic oil as needed and pay attention to the normal system fluid level to avoid overheating of the drive system.

 

2.2 The Hydraulic Oil Filter Is Dirty

Users should pay attention to changing the hydraulic filter regularly and always keep the filter element of Case 85XT clean. In this way, the normal operation of the hydraulic system of the user's Case 85XT can be maintained.

 

2.3 The Safety Valve Is Stuck

If the user finds that the safety valve of the Case 85XT is stuck during inspection, the safety valve must be replaced or repaired in time. This is the key to solving the problem of the Case 85XT’s drive system constantly overheating.

 

2.4 Worn Hydraulic Motor Or Drive Pump

MyMROmarts reminds users to check the hydraulic motor or drive pump regularly. This is something that some users will ignore, and it is also one of the reasons why the drive system continues to overheat.

 

2.5 Hydraulic Oil Cooler Is Dirty

Users should pay attention to cleaning the heat sink on the hydraulic oil cooler. This can improve the cooling effect of the Case 85XT's hydraulic oil cooler and prevent the drive system from overheating.

 

2.6 Drive System Overload

Users should pay attention to reasonable control of the loader load when using the Case 85XT skid steer loader. This reduces the workload on the drive system and prevents it from overheating continuously.

 

3. Case 85XT Skid Steer Loader Engine Overheats

3.1 Case 85XT Coolant Is Insufficient

When the user finds that Case 85XT is low on coolant, pay attention to checking the coolant level and whether there are leaks in the cooling system. MyMROmarts reminds users to refill coolant in time to prevent engine overheating.

 

3.2 Case 85XT Engine Oil Is Insufficient

Users remember to maintain the oil in the engine crankcase at normal levels and refill the oil in time. This is a measure to prevent overheating of the skid steer loader engine and is also a way to solve engine overheating. Engine oil maintains normal lubrication and cooling of the engine, which is very important for the Case 85XT engine.