Manual Key Start DSE501K Generator Controller Electronics Modul for Deep Sea
The model 501K is a Manual Engine Control Module, which is designed to manually control the engine via a key
switch on the front panel. The module is used to start and stop engine, indicating fault conditions, automatically s
hutting down engine and indicating engine failure by LED giving true first up fault annunciation.
Oil Pressure Monitoring
Engine Temperature Monitoring
Charge Failure Warning
DC Supply:9 to 33 V Continuous.
Cranking Dropouts:Able to survive voltage dips during cranking. This is achieved without the need
for internal batteries.
Alternator Input Range:15 - 305 V AC RMS
Alternator Input Frequency:50 - 60 Hz at rated engine speed.
Magnetic Input Range:0. 5 V to +/- 80 V
Magnetic Input Frequency:2300Hz to 6000 Hz at rated engine speed.
Start Relay Output:16 Amp DC at supply voltage.
Run Relay Output:16 Amp DC at supply voltage.
Alarm Output:1 Amp DC at supply voltage.
Dimensions:72 X 72 X 118. 5 (Excluding Key-switch)
Operating Temperature Range:-30 to +70°C
Front panel mounting via suitable cut-out.
Retaining clips supplied.
Cable connections via locking plug and socket type connectors.
Calibration:Speed trip setting and meter calibration adjustment potentiometer are accessible
from the rear of the module
Manual Key Start DSE501K Generator Controller Electronics Modul for Deep Sea for sale on our website.
In addition to Manual Key Start DSE501K Generator Controller Electronics Modul, you can also buy other models or other parts of Excavators, Forklift, Aerial Work Platforms AWP and etc. on our website.
Right parts, guaranteed. If you find any defects, let us know within 60 days and we’ll take care of it. Check out our Warranty Policy for more details.
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund. Check out our Return Policy for more details.